Rip Rap (6 - 12")

Approx. 30-150 lbs by piece
Product ID 624
$18 - $538
Delivered Price per ton / yd


Your Total
$0.00
Stuck? We are here to help! Get a Quote for Aggregates

Information

Rip Rap (6 - 12"): Erosion Control Stone for Soil Stabilization

Rip Rap (6 - 12") is a loose, angular stone material designed for effective erosion control and soil stabilization. Each stone measures between 6 and 12 inches in nominal diameter and typically weighs from 30 to 150 pounds per piece. Stones are commonly made from granite, limestone, or other hard rock types, and are washed to remove fines such as dirt and sand. The irregular, angular shapes allow the stones to interlock, providing stability and resistance against displacement by water flow. Rip Rap is supplied loose, not mortared, and provides high permeability, making it suitable for applications where water needs to drain through the material.

This product is widely known under several names, including riprap, rock armor, erosion control stone, shot rock, rubble stone, and armor stone. It is manufactured to meet ASTM D6092 standards for stone used in erosion control. Stones are selected for durability, with a minimum specific gravity typically at or above 2.5 (ASTM C127) and absorption rates of 2% or less. Rip Rap must also pass freeze-thaw and abrasion resistance tests (ASTM C535, C131). It is free from organic material, clay, or debris, and is placed to a specified thickness-often 1.5 to 2 times the maximum stone size. For some installations, a filter fabric or bedding layer may be required underneath to prevent soil migration through the voids.

Rip Rap (6 - 12") is delivered as a bulk product. Allow for up to 15% of the load to include stones larger than the specified size range, with some pieces measuring up to 1 or 2 feet. Traces of dirt may be present due to transport requirements. This product is not suitable for use as a walkable surface, for decorative landscaping where a uniform appearance is needed, or as a compacted base or structural fill. It should not be used in high-velocity flow areas unless the stone size is adequate, nor in underwater applications without proper engineering. Soil particles can migrate through the voids if a filter layer is not used.

Key Characteristics of Rip Rap (6 - 12")

  • Stone size: 6 to 12 inches (nominal diameter), approx. 30-150 lbs per piece
  • Made from durable, angular granite, limestone, or other hard rock
  • Irregular shapes for interlocking and stability
  • Color: typically gray or earth tones, varies by source
  • Washed and free of fines
  • Meets ASTM D6092, C127, C535, and C131 standards
  • High permeability, resists water displacement

Common Applications

  • Erosion control on shorelines, riverbanks, and streams
  • Slope stabilization and bridge abutment protection
  • Stormwater channel lining and culvert inlet/outlet protection
  • Dam, spillway, and roadway embankment armoring
  • Retention pond edges and wave energy dissipation
  • Scour protection in moderate flow conditions

Limitations and Incorrect Applications

Limitation Description
Not a walkable surface Irregular, loose stones are not suitable for pedestrian use.
Not decorative Appearance is varied and not uniform.
Not for structural fill Should not be compacted or used as a base material.
Soil migration risk Filter layer required to prevent soil loss through voids.
Size limitations Not suitable for high-energy environments needing larger stone.
Regulatory restrictions Check local water quality rules before use in regulated areas.

Rip Rap (6 - 12") at a Glance

Specification Detail
Stone Size 6-12 inches (longest axis)
Weight per Piece 30-150 lbs (approximate)
Material Granite, limestone, or other hard rock
Color Gray, earth tones, varies by source
Standards ASTM D6092, C127, C535, C131
Absorption ?2%
Specific Gravity ?2.5
Placement Loose, to specified thickness

Comparison Notes

Rip Rap (6 - 12") provides more resistance to displacement than smaller stone, such as gravel. Unlike gabion baskets, Rip Rap is not confined in wire mesh and may be less stable on steep slopes. Compared to concrete revetment, Rip Rap is more permeable and flexible, but may require more maintenance. It offers immediate protection, unlike vegetative stabilization, but does not provide habitat or aesthetic benefits. The 6-12 inch size is intended for moderate flow conditions; larger sizes are used for higher energy environments.

Price Examples by Location

Rip Rap (6 - 12") is available for delivery across the United States. Prices vary by city, county, and delivery distance. The table below provides a sample of current prices, including both the per-ton material cost and delivery fee. For an exact quote for your location, enter your ZIP code on our website or add the product to your cart to view total costs, including all taxes and fees.

City ZIP Code County Price per Ton (USD) Delivery Price (USD)
Conyers 30012 Rockdale 132 193
Adamsville 38310 McNairy 26 198
Indiana 15701 Indiana 26 140
Rolesville 27571 Wake 59 166
Midlothian 23112 Chesterfield 123 200
Banner Elk 28604 Avery 41 238
Athens 37303 McMinn 38 180
Garner 27529 Wake 74 145

Ordering and Delivery with Gravelshop

Ordering Rip Rap (6 - 12") from Gravelshop is fast and straightforward. Enter your ZIP code to see local prices, add the product to your cart, and complete your order online. All prices include delivery, taxes, and fees-there are no hidden costs. Delivery will be made to the most suitable location on your property, as determined by the driver. If you are not present, you accept responsibility for the placement and security of the material. We do not spread the material, but drivers may perform a tail-gated dump at their discretion.

Gravelshop accepts major credit cards and digital payment methods. Orders can be placed online in less than a minute, and you will receive a confirmation email with payment and shipping details. You can select your preferred delivery date and time window during checkout. Our customer service team is available by phone, email, or SMS to answer any questions.

Summary

Rip Rap (6 - 12") is a durable, angular stone product for erosion control and soil stabilization in moderate flow environments. It meets industry standards for strength, durability, and sizing, and is delivered loose for easy placement. Not suitable for decorative, walkable, or structural fill uses. Pricing varies by location and includes delivery. For more details, use our online calculator or contact Gravelshop support.



Similar Products

Related Topics

What is Rip Rap Rock?

Think rip rap is a music genre? Discover the wave-beating stones protecting shorelines, roads, and yards, and which size you need.

Learn More

Rip Rap Rock, Boulders & Surge Stone Products

Plenty of rip rap, surge stone, gabion rock, and boulders on hand in several sizes. Pulled from local quarries and kept stocked for drainage, ero...

Explore Category

Rip Rap 6-12 inches | Product video

Product video of 6–12 inch rip rap stone used for slope and shoreline protection.

Watch Video


Frequently Asked Questions

Rip Rap (6 - 12") consists of large, angular stones sized between 6 and 12 inches. It is designed for erosion control and soil stabilization in landscaping and construction projects. Each stone weighs approximately 30 to 150 pounds.

Rip Rap (6 - 12") is placed loose to protect shorelines, riverbanks, and slopes by dissipating wave energy and preventing soil erosion. Its interlocking shape provides stability and allows water to drain through, reducing displacement.

Rip Rap (6 - 12") is not suitable as a walkable surface due to its loose and irregular stones. It is intended for erosion control and soil stabilization, not pedestrian use or decorative landscaping.

For effective use, Rip Rap (6 - 12") is typically placed to a thickness of 1.5 to 2 times the stone size. A filter fabric or bedding layer may be needed underneath to prevent soil migration through voids in the stones.

Rip Rap (6 - 12") stones are made from durable hard rock such as granite and limestone. The stones are washed and free from fines like dirt and sand to meet industry standards.

Rip Rap (6 - 12") is washed and free of fines but may contain some traces of dirt due to transport. It is delivered loose, not mortared, and ready for placement according to project specifications.

Rip Rap (6 - 12") should not be used for decorative purposes, structural fill, or in high-velocity flow areas without proper sizing. It requires a filter layer to prevent soil loss and is not suitable for underwater applications without engineering.

Pricing for Rip Rap (6 - 12") varies by location and includes delivery, taxes, and fees. Enter your ZIP code on our website to view local prices or add the product to your cart for a complete quote.


More Questions? Tap the chat icon in the bottom-right to ask our AI assistant.

(844) 331-9393
Our support team is ready to help

Select Quantity